vibe-sketcherDocumentation

Nanocarbon research workflows

This coverage map connects the published work of Noe T. Alvarez and collaborators to drawing and structure-building tools. It uses a DOI survey dated 2026-10-27 and a code/library audit on 2026-11-11. The survey contains 84 DOI-listed publications (83 journal articles and one proceedings contribution, 2005–2026). It is a bounded inventory, not a claim to include every publication, chapter or future project. Eight proceedings entries and eleven chapters without DOIs in the source survey are outside the inventory. The lab publication list is the public starting point for updates.

Of the 84 records, 48 matched a local full-text PDF by DOI. “Located” below means that a text was found, not that every experiment or figure was reproduced. The implementation decisions use the selected primary sources described below; other records are grouped by the survey’s theme and remain candidates for a paper-specific workflow review. Titles and bibliographic metadata are recorded; paper text, figures and supporting datasets are not redistributed.

What can be built and drawn

Research workflow

Available construction/drawing path

Explicit boundary / remaining work

SWCNT/MWCNT chirality, diameter and length

Nanotube builder: finite chiral tubes, concentric walls, H/OH/COOH ends, limited caps, vacancies and Stone–Wales defects

Ideal starting coordinates; arbitrary caps, growth-selected chirality distributions and experimentally reconstructed defects are not generated

Aligned forests, bundles and fibre cross sections

Hexagonal or square finite nanotube assemblies; lattice, schematic and end-on pictures; XYZ/QVF

Identical parallel segments, no intertube bonds; no macroscopic fibre, random network, twist or densification mechanics

Extended CNT/BN and layered structures

Solid-state builder: periodic cells and layer-based nanotubes

Periodic cells and finite assemblies are different models; they do not simulate CVD growth

Catalyst nanoparticles and oxide monolayers

Surfaces/nanoparticles, formula species, apparatus, molecular linkers and periodic crystal/slab builders

Figure monolayers are schematic; a formula does not resolve a mixed-oxide phase or experimental nanoparticle morphology

CNT end-on/sidewall attachment to Cu, Au and other metals

Functionalized tube models, molecular linkers, surfaces, labelled attachments and reaction schemes

A graphical attachment is not an atomistic covalent CNT–linker–metal junction; site-specific chemistry and geometry require explicit construction/validation

Electrografting, diazonium chemistry and photofunctionalization

Template library, generic attachments, reaction arrows/conditions, OH/COOH sidewall motifs

No mechanism inference, wavelength-dependent selectivity or arbitrary grafted atomistic polymer

CNT microelectrodes, neurotransmitters, heavy-metal sensing and electrolysis

Electrochemical reactions, reference electrodes, potentials, formula ions, analytes, apparatus and end-on/sidewall depictions

Drawing and bookkeeping do not predict voltammograms, detection limits, transport or sensor response

Polymer-coated fibres, composites, neural electrodes, cables and antennas

Polymer repeat units, finite CNT bundles, labelled process/device schemes and representative coated and disordered composites

A composite model is an unrelaxed representative volume element, not an equilibrated polymer shell or the macroscopic fibre; electrical, mechanical and biological performance require independent methods/data

Supercapacitors, CNT–Au/graphene electrodes and membranes

CNT/graphene models, metal/surface partners, electrochemical schemes and layered periodic models

No capacitance, porous-network, wetting or membrane-permeation prediction

Molecular mechanisms and catalytic cycles

Molecule drawing, template scaffolds, reaction layout and catalytic cycles

A drawn mechanism is a proposal, not a computed reaction path

Primary-source checks behind the assembly design

  • Alvarez et al., Polymer Coating of Carbon Nanotube Fibers for Electric Microcables (2014), doi:10.3390/nano4040879: aligned bundles and polymer-coated fibres motivate representative tube packing and the distinction between an atom model and a macroscopic coated fibre.

  • Gupta et al., Electrochemistry of Controlled Diameter Carbon Nanotube Fibers at the Cross Section and Sidewall (2019), doi:10.1021/acsaem.9b01723: end-on and sidewall exposure motivate separate depiction choices; the builder makes no electrochemical-activity inference from the view.

  • Nawarathne et al., Creating covalent bonds between Cu and C at the interface of metal/open-ended carbon nanotubes (published online 2023, journal volume 2024), doi:10.1039/d3na00500c: carboxylated CNT ends and surface aminophenyl linkers motivate preserving functionalization in arrays. The reported metal-face-dependent bonding is not reproduced by merely placing a tube near a metal surface.

  • Regmi et al., Monolayer Films of Binary Metal Oxide Nanoparticles for Carbon Nanotube Synthesis (2026), doi:10.1002/smll.74422: catalyst monolayers and aligned forests motivate array drawings; finite nanometre-scale representatives do not reconstruct the reported grown forest.

Remaining construction work

The next distinct packages are explicit CNT–linker–metal junctions (including metal-face/site selection and end-on versus sidewall chemistry), coated/disordered fibre composites, and catalyst-supported forest/process scenes. Each needs a separate model contract and acceptance examples from the relevant paper and SI. The current finite assembly feature does not silently stand in for any of these. No release milestone or quantitative experimental-validation claim follows from this map. Explicit junction work is tracked in #240 (dependent on interfaces/extended defects #197). Coated and disordered fibre work is tracked in #241 (dependent on polymer boxes/membranes #205). Paper-specific acceptance must distinguish those generic builders from a verified reconstruction of a published system.

The first junction slice is in place: CNT–linker–metal junctions builds unrelaxed end-on and sidewall models on explicit Cu and Au sites, using the Table 1 Cu–C distances of doi:10.1039/d3na00500c and labelled illustrative values elsewhere.

DOI inventory

Themes are the source survey’s classifications: synthesis (19), interfaces (14), electrochemistry (24), devices/composites (25), and organic mechanisms (2). “Not matched” is not proof that a full text is unavailable: it was not matched by DOI during this audit. Years follow the survey, which sometimes records online-first rather than volume publication dates.

Year

Publication

Theme

Library full text

2005

Investigating the Reaction of N-Carbobenzoxy-O-carbobenzoxy- hydroxylamine with Dimethyl Sulfoxide: Formation of S,S-Dimethyl-N-[(phenylmethoxy)- carbonyl]sulfoximine

organic

Located

2005

N-Nitrosoamide-Mediated N → O Nitroso Transfer to Alcohols with Subsequent Denitroxylation

organic

Located

2006

Dielectrophoresis Field Flow Fractionation of Single-Walled Carbon Nanotubes

devices

Located

2008

Selective Photochemical Functionalization of Surfactant-Dispersed Single Wall Carbon Nanotubes in Water

interfaces

Located

2009

Abrasion as a Catalyst Deposition Technique for Carbon Nanotube Growth

synthesis

Located

2009

Dendrimer-Assisted Self-Assembled Monolayer of Iron Nanoparticles for Vertical Array Carbon Nanotube Growth

synthesis

Located

2009

Odako growth of dense arrays of single-walled carbon nanotubes attached to carbon surfaces

synthesis

Located

2010

Dry Contact Transfer Printing of Aligned Carbon Nanotube Patterns and Characterization of Their Optical Properties for Diameter Distribution and Alignment

synthesis

Located

2010

Wet Catalyst-Support Films for Production of Vertically Aligned Carbon Nanotubes

synthesis

Located

2011

Uniform Large Diameter Carbon Nanotubes in Vertical Arrays from Premade Near-Monodisperse Nanoparticles

synthesis

Located

2013

Atmospheric Pressure Plasma Functionalization of Dry-spun Multi-walled Carbon Nanotubes Sheets and its application in CNT-Polyvinyl Alcohol (PVA) Composites

interfaces

Not matched

2013

CVD growth, characterization and applications of carbon nanostructured materials

synthesis

Not matched

2013

Detection of Trace Zinc by an Electrochemical Microsensor based on Carbon Nanotube Threads

electrochemistry

Located

2014

A Corrugated Graphene–Carbon Nanotube Composite as Electrode Material

synthesis

Not matched

2014

Aligned carbon nanotube/copper sheets: a new electrocatalyst for CO 2 reduction to hydrocarbons

electrochemistry

Located

2014

Carbon nanotube sensor thread for distributed strain and damage monitoring on IM7/977-3 composites

devices

Not matched

2014

Electromagnetic Simulation and Measurement of Carbon Nanotube Thread Dipole Antennas

devices

Not matched

2014

Polymer Coating of Carbon Nanotube Fibers for Electric Microcables

devices

Located

2014

Preparation and characterization of graphene paper for electromagnetic interference shielding

devices

Not matched

2014

Radiation Performance of Polarization Selective Carbon Nanotube Sheet Patch Antennas

devices

Not matched

2014

Simultaneous Detection of Heavy Metals by Anodic Stripping Voltammetry Using Carbon Nanotube Thread

electrochemistry

Located

2015

Beyond graphene foam, a new form of three-dimensional graphene for supercapacitor electrodes

synthesis

Located

2015

Carbon Nanotube Fabric Cooling System for Firefighters and First Responders: Modeling and Simulation

devices

Not matched

2015

Carbon nanotube assembly at near-industrial natural-fiber spinning rates

devices

Not matched

2015

Free-standing carbon nanotube–titania photoactive sheets

electrochemistry

Not matched

2015

Influence of annealing on thermal and electrical properties of carbon nanotube yarns

devices

Not matched

2015

Optically Transparent Carbon Nanotube Film Electrode for Thin Layer Spectroelectrochemistry

electrochemistry

Located

2015

Unifying the templating effects of porous anodic alumina on metallic nanoparticles for carbon nanotube synthesis

synthesis

Located

2016

Effects of Metal Nanoparticle Doping and In Situ Atmospheric Pressure Plasma Treatment on Carbon Nanotube Sheet Antenna Performance

devices

Not matched

2016

Knotted synthetic polymer or carbon nanotube microfibres with enhanced toughness, up to 1400 J/g

devices

Not matched

2016

Mechanical Strength Improvements of Carbon Nanotube Threads through Epoxy Cross-Linking

interfaces

Located

2016

Rapid, in situ plasma functionalization of carbon nanotubes for improved CNT/epoxy composites

interfaces

Located

2017

Carbon Nanotube Fiber Ionization Mass Spectrometry: A Fundamental Study of a Multi-Walled Carbon Nanotube Functionalized Corona Discharge Pin for Polycyclic Aromatic Hydrocarbons Analysis

devices

Located

2017

Carbon Nanotube Thread Electrochemical Cell: Detection of Heavy Metals

electrochemistry

Located

2017

Effects of laser cutting on the structural and mechanical properties of carbon nanotube assemblages

devices

Not matched

2017

Electrochemical Studies of Three Dimensional Graphene Foam as an Electrode Material

electrochemistry

Not matched

2017

Flexible Micro‐Supercapacitor Based on Graphene with 3D Structure

devices

Located

2017

Heatable carbon nanotube composite membranes for sustainable recovery from biofouling

devices

Located

2017

Normal incidence acoustic absorption characteristics of a carbon nanotube forest

devices

Not matched

2017

Three-dimensional texture analysis of aligned carbon nanotube structures

devices

Not matched

2017

Three-dimensional, free-standing polyaniline/carbon nanotube composite-based electrode for high-performance supercapacitors

devices

Not matched

2018

Improved dry spinning process at elevated temperatures for making uniform and high strength CNT fibers

devices

Not matched

2018

Integrated graphene-sulfur cathode and separator with plasma enhancement for Li-S batteries

devices

Not matched

2018

Tailoring physical properties of carbon nanotube threads during assembly

devices

Not matched

2019

A Simple Two-Step Process for Producing Strong and Aligned Carbon Nanotube-Polymer Composites

devices

Located

2019

A scalable nano-engineering method to synthesize 3D-graphene-carbon nanotube hybrid fibers for supercapacitor applications

devices

Not matched

2019

Defect Sites Modulate Fouling Resistance on Carbon-Nanotube Fiber Electrodes

interfaces

Located

2019

Electrochemistry of Controlled Diameter Carbon Nanotube Fibers at the Cross Section and Sidewall

electrochemistry

Located

2019

Fabrication and study of supercapacitor electrodes based on oxygen plasma functionalized carbon nanotube fibers

interfaces

Not matched

2020

Carbon Nanotube Fibers for Neural Recording and Stimulation

devices

Located

2020

Carbon Nanotube Formation on Cr-Doped Ferrite Catalyst during Water Gas Shift Membrane Reaction: Mechanistic Implications and Extended Studies on Dry Gas Conversions

synthesis

Located

2020

Inkjet Printed Multi‐walled Carbon Nanotube Sensor for the Detection of Lead in Drinking Water

electrochemistry

Located

2020

Scalable CVD synthesis of three-dimensional graphene from cast catalyst

synthesis

Not matched

2020

Towards on-site detection of cadmium in human urine

electrochemistry

Not matched

2020

True Picomolar Neurotransmitter Sensor Based on Open-Ended Carbon Nanotubes

electrochemistry

Located

2021

Carbon Nanotube Microelectrode Set: Detection of Biomolecules to Heavy Metals

electrochemistry

Located

2021

Chemical Bond Formation between Vertically Aligned Carbon Nanotubes and Metal Substrates at Low Temperatures

interfaces

Located

2021

Functionalized carbon nanotube microfibers for chronic neural implants

interfaces

Not matched

2021

Highly sensitive non-enzymatic glucose sensor based on carbon nanotube microelectrode set

electrochemistry

Not matched

2021

Hydrogen Nanometrology in Advanced Carbon Nanomaterial Electrodes

electrochemistry

Located

2021

Nanoelectrode Ensembles Consisting of Carbon Nanotubes

electrochemistry

Located

2021

Near-electrode pH change for voltammetric detection of insoluble lead carbonate

electrochemistry

Not matched

2021

Parts per trillion detection of heavy metals in as-is tap water using carbon nanotube microelectrodes

electrochemistry

Not matched

2021

Premade Nanoparticle Films for the Synthesis of Vertically Aligned Carbon Nanotubes

synthesis

Located

2021

Thermal conductivity of 3-dimensional graphene papers

synthesis

Not matched

2022

CO-promoted low-temperature conversion of CH4 to hydrogen and carbon nanotubes on Nanocrystalline Cr-doped ferrite catalyst

synthesis

Not matched

2022

Hydrophilic Micro- and Macroelectrodes with Antibiofouling Properties for Biomedical Applications

interfaces

Located

2022

Impact of physical and chemical parameters on square wave anodic stripping voltammetry for trace Pb 2+ detection in water

electrochemistry

Not matched

2023

Chemically Bonded Carbon Nanotube Film to a Nanostructured Gold Electrode for Electrochemical Sensing of Hydrogen Peroxide

interfaces

Located

2023

Creating covalent bonds between Cu and C at the interface of metal/open-ended carbon nanotubes

interfaces

Located

2023

Evaluation of Polymer-Coated Carbon Nanotube Flexible Microelectrodes for Biomedical Applications

devices

Located

2023

Reagentless Dissolution and Quantification of Particulate Lead in Tap Water via Membrane Electrolysis

electrochemistry

Located

2023

Sidewall Chemical Bonding of Aligned Carbon Nanotubes with Metals: A Promising Route for Hybrid Materials Development

interfaces

Located

2023

Spherical aluminum oxide nanoparticle synthesis and monolayer film assembly

synthesis

Located

2023

Synthesis of bimetallic aluminum–iron oxide nanorice, nanocubes and nanospheres

synthesis

Not matched

2024

Carbon‐Nanotube Microelectrodes for Electrochemical Determination of Melatonin

electrochemistry

Located

2024

Electrochemical Quantification of Lead Scale Particulates in Drinking Water

electrochemistry

Located

2024

Electrochemical detection of lead ions using carbon nanotube post electrodes

electrochemistry

Not matched

2024

Indirect Amperometric Detection of Glucose in Simulated Urine Using Screen-Printed Electrodes

electrochemistry

Located

2025

Chemically Bonded Carbon Nanotubes to Au Films for Robust High-Performance Electrochemical Double-Layer Supercapacitors

interfaces

Located

2025

Vertically aligned carbon nanotubes from premade binary metal oxide nanoparticles on bare SiO2

synthesis

Not matched

2026

A Combined Theoretical–Experimental Study of the Interfacial Stability and Conductivity of 4-Aminophenyl and 4-Nitrobenzene Linkers on Au Surfaces

interfaces

Not matched

2026

Monolayer Films of Binary Metal Oxide Nanoparticles for Carbon Nanotube Synthesis

synthesis

Located

2026

Particulate Lead in Drinking Water: Electrochemical Detection and Quantification Challenges

electrochemistry

Located